Handle garden pruning, hedge clearance, and small log cutting with a single tool using this Mini 21V Cordless Chainsaw – a 15cm bar handheld saw built for Cyprus homeowners, smallholders, and hobby gardeners. A 400W brushed motor delivers two selectable chain speeds – 5,000 RPM for finer, more controlled cuts and 10,000 RPM when pushing through dry firewood or dense stems – while the 80mm maximum cutting depth covers the vast majority of garden tasks without requiring a larger, heavier saw. The bare-tool weight is just 700g, keeping the saw balanced and easy to direct through extended pruning sessions.
This kit ships with two 21V lithium battery packs, a spare cutting chain, and a hard plastic carry case that holds the entire bundle in one place. The twin batteries give you roughly 1.5 to 2 hours of total cutting time by hot-swapping between charges, the spare chain means you have a fresh edge ready before you ever need to source a replacement part, and the rigid case keeps saw, batteries, and chain organised from shed to garden and back. Everything is in the box; nothing extra is needed to get started.
400W Brushed Motor
The brushed motor produces 400W of output and runs the chain at two distinct speed settings, giving you enough grunt for denser wood without the bulk of a full-size corded saw.
Two-Speed Chain Control
A selectable low setting at 5,000 RPM keeps cuts precise near fences or trellises, while the high setting at 10,000 RPM moves quickly through stacked dry branches and small logs.
Twin 21V Lithium Battery Packs
Both battery packs are included in the box. Alternating between them gives roughly 1.5 to 2 hours of cutting time, with each pack reaching a full charge in approximately 90 minutes.
Spare Cutting Chain Included
A second 15cm cutting chain ships in the box, so when the working chain begins to dull you can swap to a sharp replacement on the spot rather than pausing work to source parts.
700g Bare-Tool Weight
At 700g without the battery, the saw sits comfortably in one hand for extended periods, reducing wrist and forearm fatigue during overhead cuts on tall hedges or deep-reach work in thick shrubs.
Hard Plastic Carry Case
The moulded rigid case is sized to accommodate the saw body, both battery packs, and the spare chain in a single unit, protecting all components during transport and keeping the kit together between uses.
Why Choose This Mini 21V Cordless Chainsaw in Cyprus?
Most Cyprus properties do not produce the kind of cutting work that demands a full-size petrol chainsaw. The routine maintenance around homes, orchards, and courtyards tends to involve olive and citrus prunings, regrowth on boundary hedges, vine clearance after the season, and the occasional small log for the wood burner. The Mini 21V is sized precisely for that sort of work – the 15cm bar reaches into tight positions a larger bar cannot access, and the overall dimensions keep the tool controllable in a single hand throughout.
The two-speed selector adds practical value that a fixed-speed saw simply cannot provide. Drop to 5,000 RPM when working close to a trellis, a wall, or a young tree where precision matters; switch up to 10,000 RPM when moving through a pile of dry branches or a stack of timber pieces. With two batteries supplied and a spare chain already in the box, this kit arrives ready to work today and carries enough redundancy to keep you going through a full pruning season before any replacement parts are needed.
Built for Cyprus Pruning, Garden Clearance, and Light Timber Work
- Hot-Swap Battery Convenience: Two 21V packs included so the saw keeps running while the other pack charges, eliminating downtime mid-session
- Replacement Chain Ready to Go: A spare cutting chain in the kit means a dull chain does not end the day – swap immediately and keep working
- Adjustable Chain Speed: Low and high RPM modes let you match the pace of the cut to the material, from delicate ornamental branches to dry hardwood sections
- 80mm Maximum Cutting Depth: Handles the diameter of most garden branches, orchard stems, and firewood pieces found in typical Cyprus outdoor spaces
- Single-Hand Operation: The 700g tool weight keeps the saw steady and comfortable during long hedge sessions or repeated overhead cuts without straining the wrist
- All-in-One Hard Case: The supplied rigid carry case keeps the complete kit in one place, protecting the components during storage and making transport from one area of the property to another straightforward
From trimming overgrown olive shoots in a village garden near Larnaca to tidying citrus trees in a Limassol backyard, clearing fallen pine branches after a storm in the Troodos foothills, or cutting back boundary hedges at a holiday property in Paphos, the Mini 21V handles the kind of regular outdoor maintenance that comes up throughout the year in Cyprus – quietly, without fuel, and without the setup time a petrol saw demands. Compact enough to store in a small shed and light enough to carry in one hand, it fits naturally into any garden routine.
Technical Specifications:
| Model | Mini 21V |
| Type | Cordless Mini Chainsaw |
| Motor | Brushed |
| Power | 400W |
| Voltage | 21V DC |
| Chain Bar Length | Approximately 15cm |
| Maximum Cutting Depth | 80mm |
| No-Load Speed | Low 5,000 RPM / High 10,000 RPM |
| Noise Level | 95 dB |
| Batteries Included | 2 x 21V Lithium-Ion |
| Charge Time | Approximately 90 minutes per pack |
| Total Working Time | 1.5 to 2 hours (both packs in rotation) |
| Bare-Tool Weight | 0.7 kg |
| Battery Weight | 0.35 kg per pack |
| Overall Dimensions | Approximately 42cm x 12cm |
| Housing Colour | Red and Black |
| Materials | ABS plastic body, metal bar and chain |
| In the Box | 1 x Mini Chainsaw, 2 x 21V Lithium Batteries, 1 x Spare Cutting Chain, 1 x Hard Carry Case, 1 x User Manual |
| Warranty | 2 years |
Frequently Asked Questions
What kinds of garden tasks is this saw best suited for?
The Mini 21V is designed for pruning branches, trimming hedges, clearing vine growth, cutting small logs for a wood burner, and general garden tidying. The 15cm bar handles wood up to 80mm in diameter, which covers the majority of maintenance tasks around Cyprus homes, orchards, and courtyards.
Do both batteries need to be charged before first use?
It is good practice to charge both packs fully before the first session. Only one battery is fitted to the saw at a time. When the active pack runs low, remove it, fit the second charged pack, and put the first on charge. Each pack takes approximately 90 minutes to reach a full charge.
How does the two-speed setting work in practice?
The speed selector switches the chain between 5,000 RPM and 10,000 RPM. The lower setting gives finer control for precise cuts near structures, young plants, or tight spaces. The higher setting is more productive when working through dry or dense material where speed matters more than precision.
Is the chain easy to change when it dulls?
Yes. The chain can be removed and replaced without specialist tools. When the working chain slows down noticeably or produces rough cuts, fit the spare chain from the carry case. Refer to the user manual for the correct tensioning procedure before resuming cutting.
What safety features are included?
The saw includes a trigger safety lock to prevent accidental start-up, a non-slip rear handle for a secure grip, and a front splash deflector at the chain bar. Always wear appropriate eye protection and hearing protection during use, as the noise level reaches 95 dB during operation.
