Drive fasteners, loosen rusted bolts, and tackle wheel changes with the 21V Cordless Impact Wrench – a high-torque, battery-powered tool built for workshops, home garages, and job sites across Cyprus. Delivering 400 N·m of actual torque and 1800W of output power, this wrench ships with two 10-cell 21V battery packs, a full socket set, and a rigid plastic carrying case, so everything you need arrives ready to work.
Stepless variable speed control gives you precise command over torque and RPM: press lightly for controlled, low-torque starts, and squeeze deeper to bring full power to stubborn fasteners. A Level 2 water and dust resistance rating keeps the tool running in conditions where lesser cordless tools fail. At 1.1kg bare, it handles without fatigue across extended sessions, and the English-interface control panel with LED indicator makes switching between torque settings quick and clear during use.
400 N·m Actual Torque
With 400 N·m of verified output torque and 1800W of power, this wrench generates enough force to break loose heavily corroded fasteners and lug nuts without the need for an air compressor or corded power source.
Two 10-Cell 21V Battery Packs
Both batteries are included in the box, each built with 10 individual cells. Swap between them during longer jobs so one charges while the other keeps the tool running, with approximately one hour of runtime per charge.
Stepless Variable Speed Control
Trigger depression controls both speed and torque in a continuous, uninterrupted range. A light press delivers slow, accurate fastener seating; a full squeeze brings maximum rotational force for demanding removal tasks.
Level 2 Water and Dust Resistance
Rated at Level 2 for both water and dust ingress protection, the tool holds up in outdoor garage environments, dusty workshops, and light wet-weather conditions without performance degradation.
Complete Socket and Accessory Kit
Six deep sockets (14, 17, 18, 19, 21, and 22mm), a drill bit, drill chuck, adapter, screwdriver bits, O-ring, pin, and a charger are all packed into the included hard plastic carrying case.
Compact and Lightweight at 1.1kg
The bare tool weighs just 1.1kg and measures 16 × 20.5 × 8.5cm, making it easy to manoeuvre in tight engine bays, under vehicles, and in confined spaces where bulkier tools cannot reach.
Why Choose This 21V Cordless Impact Wrench in Cyprus?
This 21V Cordless Impact Wrench is built for users who need genuine torque output without being tethered to a wall socket or an air compressor. Across Cyprus, where home garages, small workshops, and roadside tyre changes are common, a self-contained cordless tool with two batteries, a full socket kit, and a carrying case represents a practical, grab-and-go solution for both planned maintenance and unexpected situations.
At 400 N·m, this wrench handles tasks that many cordless tools in its class cannot: removing overtightened lug nuts, breaking loose corroded bolts, and driving large fasteners into dense material. The stepless trigger means the same tool that finishes furniture bolts at low torque can also crack open a rusted suspension component at full power, with no mode switching required.
Built for Cyprus Garages, Workshops, and DIY Use
- Dual Battery Convenience: Two 21V battery packs let you rotate between cells during longer jobs, keeping downtime to a minimum
- No Compressor Required: Full cordless operation means no air lines, no hose management, and no need for compressor space in the garage
- Tyre and Wheel Work: The 17, 19, and 21mm sockets cover the most common lug nut sizes found on passenger vehicles in Cyprus
- Protected Against the Elements: Level 2 water and dust resistance suits the outdoor and semi-covered workspaces common in Cypriot properties
- Carry Case Included: The rigid plastic case keeps all sockets, accessories, and batteries organised and protected between uses
- Drilling and Driving Capability: The included drill chuck and adapter extend the tool beyond impact wrench work into drilling and screwdriving tasks
From home mechanics in Nicosia and Limassol to tradespeople across Larnaca and Paphos, cordless impact tools have become a standard part of the working toolkit. This unit delivers the output torque and accessory range to cover the majority of fastener-related tasks most users encounter, stored neatly in a single carrying case that fits in the boot of a car or on a workshop shelf.
Technical Specifications:
| Voltage | 21V |
| Actual Torque | 400 N·m |
| Output Power | 1800W |
| Battery Packs Included | 2 x 10-cell 21V battery packs |
| Runtime (per charge) | Approx. 1 hour |
| Charging Time | 3 to 5 hours |
| Speed Control | Stepless variable speed via trigger |
| Water Resistance | Level 2 |
| Dust Resistance | Level 2 |
| Tool Weight (bare unit) | 1.1kg |
| Dimensions | 16 × 20.5 × 8.5cm |
| Control Panel | English interface with LED indicator |
| Sockets Included | 14 / 17 / 18 / 19 / 21 / 22mm |
| Includes | 2 x batteries, charger, 6 sockets, drill bit, drill chuck, adapter, screwdriver bits, O-ring, pin, plastic carrying case, instruction manual |
| Warranty | 2 years |
Frequently Asked Questions
Are both battery packs included in the box?
Yes. Two 10-cell 21V battery packs are included with every unit, along with a single charger. Each battery provides approximately one hour of runtime under normal working conditions.
What socket sizes come with the wrench?
The kit includes six deep-drive sockets sized at 14, 17, 18, 19, 21, and 22mm, covering the most commonly encountered fastener sizes for vehicle and general mechanical work.
Can it be used for drilling as well as impact work?
Yes. The included drill chuck and adapter allow the tool to accept drill bits and screwdriver bits, extending its use beyond standard impact wrench applications.
How does the variable speed control work?
Speed and torque are controlled by how far the trigger is depressed. A partial squeeze delivers slower, lower-torque output for precision work; a full depression brings the tool to maximum speed and torque for heavy fastening or removal.
Is it suitable for outdoor use in Cyprus’s climate?
The Level 2 water and dust resistance rating makes it suitable for use in outdoor garages, covered workshops, and light wet conditions, which covers most working environments encountered in Cyprus.
