Train your back, chest, arms, and core from a single floor-standing unit with this Freestanding Power Tower – a multi-station home training rack built for apartments, garages, and dedicated workout corners across Cyprus. The frame is constructed from 1.3mm thickened square steel tube in an I-shaped profile, paired with a padded backrest, twin top crossbars, dip handles, and base-level push-up grips that cover most bodyweight movements in one footprint.
The top bar adjusts across 11 positions between 170cm and 230cm in 6cm steps, so taller and shorter users can both set a comfortable hanging height. The wide figure-eight base spreads weight across four contact points to keep the rack planted during heavy sets, and the square-tube structure resists the flex and twist that thinner round tubing tends to develop over time. Rated for a 1000kg (roughly 2200 lb) static load, it stands free on the floor with no wall mounting or ceiling fixing needed.
I-Shaped Square Steel Frame
The main posts use thickened square tube in an I-shaped layout. In factory press testing, square section held firm at far higher loads than round tube of comparable size, which began deforming much sooner.
11-Position Height Adjustment
A nut-and-clamp mechanism sets the top bar anywhere from 170cm to 230cm across 11 settings spaced 6cm apart, letting you dial in a clean hang height for your reach.
Cushioned Backrest Pad
A padded vertical backrest supports your spine during knee and leg raises, keeping your torso upright so you stay in good form instead of hanging from your neck and shoulders.
1000kg Static Load Rating
The thickened steel build carries a 1000kg static rating, giving wide headroom over body weight so the rack stays solid during dynamic pull-ups, muscle-ups, and weighted dips.
Figure-Eight Anti-Tip Base
The splayed figure-eight feet widen the footprint to 100cm by 85cm and grip the floor across four points, holding the rack steady and resisting sideways tipping during pull movements.
Multi-Layer Steel Tubing
Each tube combines a thickened steel core, a reinforced support layer, an inner shock-damping layer for added toughness, and an anti-rust outer coating that guards against oxidation.
Why Choose This Freestanding Power Tower in Cyprus?
This Power Tower suits anyone who wants a serious calisthenics setup without drilling holes in walls or ceilings. Many homes in Cyprus are rented or built with concrete and tile that make doorway bars and wall fixings awkward, so a freestanding rack that simply stands on the floor solves the mounting problem entirely while still giving you a full pull and push station.
The twin top bars allow wide, narrow, and neutral grip variations, so one piece of kit covers pull-ups, chin-ups, hanging leg raises, dips, and floor push-ups. With a height range running up to 230cm, even tall users can hang fully extended without their feet touching down, which matters for clean reps and proper range of motion.
Made for Cyprus Home Gyms and Bodyweight Training
- No Wall Drilling: Stands free on the floor, ideal for rentals and concrete or tiled interiors where fixings are impractical
- Multiple Stations in One: Pull-up bars, dip handles, knee-raise station, and base push-up grips on a single frame
- Adjustable Bar Height: 11 settings from 170cm to 230cm in 6cm steps to fit different users and exercises
- Heavy Static Rating: 1000kg static load gives plenty of margin for weighted training and explosive reps
- Stable Wide Base: Figure-eight feet across a 100cm by 85cm footprint hold the rack down during pulls
- Corrosion-Resistant Finish: Multi-layer steel construction with an anti-rust coating built for long-term indoor use
Bodyweight athletes, beginners building their first pull-up, and lifters adding back and arm volume across Nicosia, Limassol, Larnaca, and Paphos use a power tower as the backbone of a home routine. This rack brings that station indoors at a fraction of a full gym membership, and its single footprint means you can leave it set up and ready in a spare room, balcony corner, or garage.
Technical Specifications:
| Adjustable Height | 170cm to 230cm |
| Height Settings | 11 positions, 6cm per step |
| Base Footprint | 100cm x 85cm |
| Tube Wall Thickness | 1.3mm |
| Frame Profile | I-shaped thickened square steel tube |
| Static Load Capacity | 1000kg (approx. 2200 lb) |
| Base Type | Figure-eight anti-tip feet |
| Training Stations | Pull-up bars, dip handles, knee-raise backrest, base push-up grips |
| Materials | Multi-layer steel tube with anti-rust coating, padded backrest, foam grip bars |
| Includes | 1 x Freestanding Power Tower with fittings |
| Warranty | 2 years |
Frequently Asked Questions
Does it need to be fixed to a wall or ceiling?
No. The tower is fully freestanding and stands on its own figure-eight base, so no wall drilling or ceiling fixing is required. The wide feet keep it stable on the floor.
How tall can the pull-up bar go?
The top bar adjusts from 170cm up to 230cm across 11 settings in 6cm increments, so taller users can hang at full stretch without touching the ground.
What exercises can I do on it?
It covers pull-ups, chin-ups, dips on the side handles, hanging knee and leg raises against the padded backrest, and push-ups using the grips at the base. The twin top bars allow wide, narrow, and neutral grips.
Why square steel tube instead of round?
Square section resists bending and twisting better than round tube of similar size under load. In factory press tests the square structure held firm at much higher pressure before any deformation, which is why this frame uses a thickened I-shaped square profile.
How much floor space does it take up?
The base measures 100cm by 85cm, so it fits comfortably in a spare room, garage, or balcony corner while still giving a stable footprint for heavy sets.
