Fit out your oscillating multi-tool once and stop buying blades one at a time. This 166 Piece Multitool Saw Blade Set brings together cutting, sanding, rasping and scraping accessories in a single organised box, covering the full spread of jobs a multi-tool is actually asked to do on a Cyprus renovation site. Straight blades, plunge blades, segment blades, semicircular blades, hook knives, carbide rasps, rigid scrapers and triangular sanding pads are all included.
The cutting blades are produced in three specifications. High carbon steel bodies are quenched and forged for hardness and toughness on timber and plastics, bi-metal blades handle embedded nails and screws, and titanium coated blades extend working life in mixed demolition cuts. Tooth patterns follow Japanese-style geometry for a clean, fast entry into the workpiece. Every accessory uses a universal multi-fit arbor, so the set works with the majority of oscillating multi-tools sold in Cyprus rather than being locked to one brand.
166 Accessories in One Box
Cutting blades, carbide rasps, scraper blades, triangular sanding pads and abrasive sheets arrive together, so a single purchase covers demolition, trimming, finishing and clean-up tasks.
Quenched High Carbon Steel Bodies
Blade bodies are forged and heat treated, giving the rigidity needed to resist flexing under load and the toughness to survive plunge cuts into dense timber.
Japanese-Style Tooth Geometry
Fine, aggressively raked teeth bite on the pull stroke and clear waste quickly, producing a narrow kerf in skirting, architrave, plywood and plastic trim.
Universal Multi-Fit Arbor
The open star and slot mounting pattern seats on the drive spindles used by most popular multi-tool platforms, including quick-release and bolt-on collars.
Bi-Metal Blades for Nails and Screws
Welded bi-metal cutting edges take the shock of hitting fixings buried in old joinery, letting you cut through timber and embedded metal in one continuous pass.
Sanding, Rasping and Scraping
Triangular hook and loop pads with six dust holes, graded abrasive sheets, carbide grit rasps and flat scraper blades handle surface preparation, grout removal and adhesive stripping.
Hook Knife for Soft Materials
A curved multi-knife blade cuts carpet, underlay, hessian backing, roofing felt and rubber sheet on both the pull and push edge, following curves without tearing the material.
Etched Millimetre Depth Scale
Cutting blades carry a printed metric and imperial scale along the body, so plunge depth can be judged directly off the blade instead of being measured and marked separately.
Why Choose This 166 Piece Multitool Blade Set in Cyprus?
Cyprus housing stock presents a specific mix of materials. Reinforced concrete shells, full tiled floors, aluminium window and shutter profiles, plasterboard partitions added during later conversions, and timber joinery that has usually been painted and refixed several times. A multi-tool is often the only machine that will reach into these details, and its usefulness depends entirely on having the right blade to hand.
Buying accessories individually gets expensive quickly, and running out of a particular profile mid-job means stopping work. Holding 166 pieces means the plunge blade for a socket cut-out, the segment blade for an undercut, the carbide rasp for tile adhesive and the abrasive pads for finishing are all already in the box when the job changes direction.
Suited to Cyprus Renovation and Maintenance Work
- Tile and Grout Work: Carbide grit rasps and segment blades clear old grout lines and tile adhesive residue from the tiled floors found in most Cypriot properties
- Aluminium Profile Trimming: Bi-metal blades cut the aluminium window frames, shutter tracks and rooflight sections used widely in local construction
- Plasterboard Cut-Outs: Plunge blades open clean apertures for sockets, spotlights and air conditioning pipework in partition walls
- Painted Joinery Removal: Blades with embedded fixing tolerance cut through old door frames, skirting and shutter boxes without pre-drilling or dismantling
- Flooring Refits: The hook knife trims carpet, underlay and vinyl during floor changeovers, while flush blades undercut architrave for laminate runs
- Sealed Packaging: Each accessory stays individually wrapped until use, which matters in coastal locations where humidity and salt air reach unprotected steel in storage
Joiners, tilers, electricians and property maintenance teams in Nicosia, Limassol, Larnaca and Paphos rely on oscillating tools for the awkward cuts that larger machines cannot reach. This set removes the bottleneck of blade supply, and because the mounting pattern is universal it stays useful even if the tool itself is replaced with a different brand later on.
Technical Specifications:
| Total Pieces | 166 |
| Blade Specifications | High carbon steel (HCS), bi-metal, titanium coated |
| Blade Profiles Included | Straight, plunge cut, wide plunge, segment, semicircular, flush cut, hook knife, scraper |
| Abrasive Accessories | Triangular sanding pads, carbide grit rasps, graded abrasive sheets |
| Manufacturing Process | Quenched and forged steel body |
| Tooth Pattern | Japanese-style precision teeth on wood and plastics blades |
| Reference Blade Size | 34mm x 40mm (wood and plastics straight blade) |
| Individual Blade Weight | Approximately 20.5g |
| Sanding Pad Format | Triangular, hook and loop backing, 6 dust extraction holes |
| Mounting | Universal multi-fit arbor |
| Suitable Materials | Softwood, hardwood, plywood, plasterboard, plastics, acrylic, aluminium profile, sheet metal, nails and screws (bi-metal blades), grout and adhesive residue |
| Blade Markings | Etched millimetre and inch scale |
| Packaging | Individually sealed sleeves in a storage box |
| Warranty | 2 years |
Frequently Asked Questions
Will these blades fit my oscillating multi-tool?
The accessories use a universal multi-fit arbor designed to seat on the drive spindles used by most oscillating multi-tool brands. Compare the mounting pattern against your existing blade before fitting, as a small number of proprietary tool-free systems use a non-standard interface.
Which blades should I use on nails and screws?
Use the bi-metal blades for any cut where fixings may be present, such as removing old door frames or skirting. High carbon steel blades are intended for clean timber and plastics and will lose their teeth quickly if driven into metal.
Can the set be used for sanding as well as cutting?
Yes. Triangular hook and loop sanding pads and graded abrasive sheets are included, along with carbide grit rasp plates for coarser removal work on adhesive, filler and grout.
What materials can these blades cut?
Softwood, hardwood, plywood, plasterboard, plastic and acrylic sheet, aluminium profile and thin sheet metal are all within scope, with blade choice matched to the material. The hook knife handles carpet, underlay and similar soft sheet materials.
How do I get the longest life out of each blade?
Let the oscillation do the cutting rather than forcing the tool forward, keep the blade moving to spread wear across the teeth, and lift periodically to clear dust and allow the steel to cool. Excess pressure and heat are the main causes of premature blade failure.
