Take on drilling, driving, and household repair tasks with the AOTUO 20V Cordless Lithium-Ion Drill Driver, a complete tool kit packaged inside a hard-shell carry case for tradespeople and DIY users across Cyprus. The drill pairs a high-quality copper wire motor with a 25+1 stage torque collar, giving you precise control when driving screws into wood, fixing fittings to drywall, or boring pilot holes through metal and tile.
A two-speed mechanical gearbox lets you switch between low-gear high-torque driving and high-gear faster drilling, while the self-locking keyless chuck keeps bits secure under load. The integrated LED light at the trigger base lights up the work zone in dim cupboards, behind furniture, or under sinks. Powered by a removable 20V lithium-ion battery pack and supplied with a wall charger, this set is ready to use the moment you unlatch the case.
25+1 Stage Torque Collar
Twenty-five clutch positions plus a dedicated drill mode let you match torque output to the job, from delicate cabinet hinges to heavier wall fixings, reducing the risk of stripped screw heads or over-driven fasteners.
Two-Speed Mechanical Gearbox
Slide the top-mounted selector between gear 1 for slow, high-torque screw-driving and gear 2 for faster drilling through wood and softer materials. Both ratios stay locked in place during operation.
Self-Locking Keyless Chuck
The keyless chuck tightens by hand and grips a wide range of round and hex-shank accessories. Its self-locking action holds bits firmly during sustained drilling, reducing slippage when boring through dense materials.
Copper Wire Motor
A copper-wound motor sits at the heart of the drill, delivering steady rotational force across the torque range and managing heat better than aluminium alternatives during longer work sessions.
Built-In LED Work Light
An LED bulb located near the trigger turns on as soon as you squeeze, throwing light directly onto the drilling point. Useful inside cupboards, under desks, in lofts, or wherever overhead lighting falls short.
Forward and Reverse Trigger
A pressure-sensitive variable speed trigger allows fine RPM control, while the directional switch above the grip flips rotation for driving in or backing out screws and freeing jammed bits.
Why Choose the AOTUO 20V Cordless Drill in Cyprus?
The AOTUO 20V Drill Driver is designed for the kind of mixed-material work most Cypriot households and small contractors deal with on a regular basis: hanging picture frames on plasterboard, fixing brackets to concrete walls, assembling flat-pack furniture, repairing wooden shutters, or installing fittings in bathrooms and kitchens. The lithium-ion battery system removes the hassle of trailing cables, and the included carry case keeps the drill and all of its accessories organised between jobs.
The combination of two mechanical speed ranges and a 25+1 stage torque collar means the drill adjusts to suit the task in front of you instead of fighting against it. Pair gear 1 with a low torque setting for fragile MDF and chipboard furniture, then switch to gear 2 with the drill mode unlocked for wood, metal, or tile work. The kit is supplied complete, so the carry case opens to a ready-to-use selection of drill bits, screwdriver bits, socket adapters, and a flexible extension shaft.
Made for Cyprus Homes, Workshops, and On-Site Jobs
- Cordless Convenience: Removable 20V lithium-ion battery pack means no power lead and no compromise on mobility between rooms or floors
- Multi-Material Drilling: Suitable for wood, metal, tile, and masonry surfaces when paired with the correct bit
- Full Accessory Set: Drill bits, driver bits, sockets, and a flexible extension shaft included in the case from day one
- Soft-Grip Handle: Rubberised pistol grip with ergonomic finger contouring reduces fatigue during longer sessions
- Hard-Shell Carry Case: Latched plastic case with moulded compartments keeps the drill, charger, battery, and bits protected and portable
- Wrist Strap Included: A fabric loop attached to the base of the handle adds a layer of drop protection when working at height
Across Nicosia, Limassol, Larnaca, and Paphos, homeowners and tradespeople rely on a single cordless drill to cover the bulk of their fixing and assembly tasks. The AOTUO 20V set delivers that all-in-one practicality at an accessible price point, with the torque range, accessory selection, and battery system needed to take on day-to-day jobs around the house, garage, or job site without reaching for a second tool.
Technical Specifications:
| Brand | AOTUO |
| Tool Type | Cordless drill driver |
| Battery Voltage | 20V lithium-ion |
| Battery Type | Removable lithium-ion pack |
| Chuck Type | Self-locking keyless chuck |
| Torque Settings | 25+1 stages |
| Gearbox | Two-speed mechanical (Gear 1 low / Gear 2 high) |
| Speed Control | Variable speed trigger |
| Direction | Forward and reverse switch |
| Work Light | Integrated LED |
| Motor | Copper wire |
| Handle | Rubberised soft-grip with wrist strap |
| Colour | Red and black |
| Weight | 2.4kg |
| Dimensions (L x W x H) | 59 x 41.5 x 26.3 cm |
| Storage | Hard-shell plastic carry case with latch closure |
| Set Includes | 1 x AOTUO 20V drill driver, lithium-ion battery, mains charger, drill bits, screwdriver bits, socket adapters, flexible extension shaft, carry case |
Frequently Asked Questions
Can the AOTUO 20V drill go through tile and masonry walls?
Yes. Paired with a masonry drill bit and the torque collar set to drill mode in gear 2, the drill can bore pilot holes through tile and softer masonry surfaces for fitting plugs and wall anchors.
How do I switch between drilling and screw-driving?
Rotate the front collar. Numbered positions 1 through 25 control the torque clutch for screw-driving, while the drill icon disengages the clutch for boring holes. Use gear 1 for driving and gear 2 for drilling.
Is the battery removable for charging?
Yes. The lithium-ion pack slides out from the base of the handle and connects to the supplied mains charger. You can keep working with a second pack on charge if you have one.
Does the drill work for screws into hardwood and metal?
Yes. Set the torque collar to a higher number for harder materials and use gear 1 for the slower, higher-torque output that hardwood and metal screw-driving typically require.
What is included with the carry case?
The case holds the drill, a lithium-ion battery, the mains charger, an assortment of drill bits, screwdriver bits, metal socket adapters, and a flexible extension shaft for reaching awkward angles.
