Screws, Bolts, Anchors and Fixings for Construction, Maintenance and Industrial Use in Cyprus

The fasteners category is wider than most buyers realise until a project demands a specific thread pitch, a particular head type, or a material grade that the local hardware store does not carry in stock. A structural bolt connecting a steel beam requires a different grade designation from a machine screw threading into an aluminium extrusion, and a masonry anchor rated for a dynamic load differs fundamentally from a standard wall plug carrying a static picture hook. This range of industrial and construction fasteners covers every major fastener type across the thread standards, material grades, and coating specifications used in professional construction, maintenance, and manufacturing applications across Cyprus, with every product listed by thread diameter, length, material, and finish so buyers can identify the exact specification they need rather than approximating from what is available.

Screws, Machine Fasteners and Thread-Forming Fixings

The screws and threaded fasteners in this collection cover the full range of head types, drive formats, and substrate applications used in construction and industrial settings. Wood screws in fully threaded and partially threaded configurations are listed by diameter, length, head type, and coating: bright zinc-plated for internal dry applications, yellow passivated zinc for general purpose use, and A2 or A4 stainless steel for outdoor, marine, and coastal installations where corrosion resistance across the full fastener length is essential rather than optional. Self-tapping screws for sheet metal and light gauge steel fabrication are listed with their thread form, point type, and head configuration, since the thread angle and point geometry determine whether the screw cuts its own thread cleanly without deforming the parent material. Machine screws in metric coarse and fine thread pitches, with pan, countersunk, and socket cap head options, are listed with their ISO grade designation so buyers working to a structural or mechanical specification can confirm the tensile strength and proof load of each fastener before ordering. Chipboard and MDF screws with coarse thread profiles and reinforced shanks suited to the lower density of engineered wood panels are listed alongside fine thread hardwood screws, covering the full range of timber substrate types used in furniture, joinery, and structural timber applications.

Bolts, Nuts, Washers and Threaded Rod

Bolted connections require the correct specification across every component in the assembly, and the bolts, nuts, and washers in this range are listed with the detail needed to build a complete, correctly specified fixing. Hex head bolts in property classes 4.6, 8.8, and 10.9 are listed with their metric thread designation, shank length, and material so structural, general purpose, and high-tensile applications can each be matched to the correct grade. Coach bolts with a round head and square shank for timber-to-timber and timber-to-steel connections, carriage bolts in stainless steel for outdoor structural applications, and eye bolts and hook bolts for load-bearing suspension applications complete the bolt range, with safe working load listed where the application is a defined lifting or suspension use. Hex nuts, nyloc self-locking nuts, flange nuts, and wing nuts are listed in the thread sizes and material grades corresponding to the bolt range they accompany, and the importance of matching nut grade to bolt grade for structural applications is noted in the product listings. Form A flat washers, spring washers, and penny washers in standard and stainless steel are stocked across the thread size range, and threaded rod in metric sizes and A2 stainless steel is listed in standard lengths with cutting guidance for custom-length requirements.

Wall Plugs, Anchor Bolts and Masonry Fixings

Masonry fixings represent the highest-consequence fastener decision in most construction and installation projects, and the range here covers the full selection of anchor types required for concrete, blockwork, brick, and aerated block substrates across the range of load directions and magnitudes common in Cyprus. Plastic frame fixings and universal wall plugs cover light-duty applications including cabinet mounting, shelf brackets, and frame fixing into solid brick and blockwork, with plug diameter and recommended drill size listed on every product. Chemical anchors with injection resin and threaded rod or rebar provide the highest load capacity of any masonry fixing system and are the correct specification for structural steel connections, heavy equipment bases, and safety-critical fixings where a mechanical anchor would be insufficient or where the base material is cracked or close to an edge. Throughbolt expansion anchors, wedge anchors, and sleeve anchors in zinc-plated and stainless steel are listed with their characteristic resistance values for concrete and the minimum embedment depth required to achieve the rated load, giving specifiers the data needed to confirm suitability before installation rather than relying on a generic description. Cy Deals stocks this full range of fasteners and fixings at prices that reflect genuine market value rather than the premium applied by specialist fixings distributors and builders merchants operating in Cyprus, sourced directly and listed with the specification detail that professional buyers need to order with confidence. Delivery covers all Cyprus addresses with no hidden charges at checkout, and stock is maintained consistently across the most in-demand thread sizes, material grades, and pack quantities so a procurement run does not run into availability gaps on the fasteners most frequently required on site.