Reclaim your weekends from the skimming net with the Solar-Powered Robotic Pool Skimmer S1 – a cordless surface cleaner that harnesses the sun to keep your water clear across Cyprus. Built for residential pools of every shape, this floating robot drifts across the waterline collecting leaves, twigs, petals, insects, and hair before they sink, all while topping up its own battery through an integrated solar panel.
Powered by dual-action brushes and strong suction, the Skimmer S1 captures micro-debris as fine as 0.2mm in a single pass. It navigates in a methodical zig-zag pattern for full coverage, runs for 15 hours on a standard charge, and stretches past 24 hours when sunlight keeps it fed. When the job is done or the battery runs low, it returns and docks itself poolside for easy retrieval. With a saltwater-proof, chlorine-resistant body and a compact 42 x 32 x 16cm footprint, it is engineered to work hard and store small.
Solar Charging, 24h+ Runtime
A roof-mounted solar panel tops up the battery as the robot works, extending operation beyond 24 hours under sunlight so cleaning rarely stops for a recharge.
Smart Zig-Zag Navigation
Instead of wandering randomly, the Skimmer S1 traces a structured zig-zag route like a lawnmower, methodically covering the entire surface for thorough, predictable results.
6L Dual-Tank Capacity
A 3L plus 3L twin-basket system holds six litres of debris in a body weighing under 3kg, meaning fewer trips to empty it during heavy leaf-fall periods.
One-Touch Auto-Docking
Press the remote or let the low-battery sensor trigger it, and the skimmer returns to the poolside edge on its own, parking where you can lift it out without reaching.
Anti-Stranding Stabiliser Legs
Four stabiliser legs paired with auto-adjusting buoyancy and tilt sensors stop the unit from beaching on steps or in shallow water, so it keeps working without rescue.
Built-In Chlorine Dispenser
An onboard dispenser accepts standard 76mm chlorine tablets, letting the robot manage water sanitation as it skims, with no separate floating dispenser required.
Why Choose This Solar Pool Skimmer in Cyprus?
Cyprus delivers some of the longest, sunniest swim seasons in the Mediterranean, which makes a solar-fed skimmer a natural fit. With abundant daylight feeding the panel, the Skimmer S1 can stay on the water far longer than battery-only cleaners, turning the island’s climate into free running time rather than a recharge headache.
The same sun and coastal conditions that power the robot are also tough on equipment, which is why this unit is engineered to endure. It withstands salinity up to 3.5 percent, resists chlorine at 4ppm, stays stable in heat up to 40 degrees Celsius, and uses a UV-shielded polymer shell that holds up against constant sun exposure. Whether your pool is freshwater, saltwater, or heavily chlorinated, the skimmer keeps performing.
Made for Cyprus Pools and Hot Mediterranean Summers
- Sun-Powered Endurance: Solar charging extends cleaning past 24 hours, ideal for long Cypriot summer days
- Fits Any Pool Shape: Cleans oval, rectangular, kidney-shaped, and freeform pools with 360-degree precision
- Coastal-Ready Build: Saltwater proof and chlorine resistant for pools near the sea or with strong sanitation
- Effortless Cleaning: Rinse the baskets with a hose, sun-dry, and reassemble in minutes
- Hands-Free Control: Operate it from the included remote or let it skim and dock automatically
- Compact Storage: A 42 x 32 x 16cm body and sub-3kg weight tuck away easily in poolside cabinets or sheds
Homeowners and villa managers in Nicosia, Limassol, Larnaca, and Paphos lose hours each week to manual netting, especially during pollen season and after windy days. The Skimmer S1 takes over that chore entirely, drawing on Cyprus sunshine to patrol the surface around the clock. Backup DC charging restores 78 percent in roughly four hours when the weather turns cloudy, so the pool stays guest-ready whatever the forecast.
Technical Specifications:
| Dimensions | 42 x 32 x 16cm |
| Net Weight | Under 5kg |
| Filter Capacity | 6L (3L + 3L dual-tank) |
| Standard Runtime | 15 hours |
| Solar Runtime | 24+ hours with sunlight |
| DC Charge Time | Approx. 4 hours (to 78%) |
| Cleaning Pattern | Smart zig-zag, 360-degree coverage |
| Debris Capture | Down to 0.2mm |
| Salinity Tolerance | Up to 3.5% (saltwater proof) |
| Chlorine Resistance | Up to 4ppm |
| Heat Tolerance | Stable up to 40°C |
| Chlorine Dispenser | Compatible with standard 76mm tablets |
| Control | Wireless remote (start/pause, direction, dock, re-pair) |
| Certifications | CE, CB, FCC |
| Includes | 1 x Skimmer S1, 2 x Wheels, 1 x Filter Basket, 1 x Remote Control, 2 x Propellers, 4 x Anti-Stranding Bars, 1 x Power Adapter, 1 x Anti-Stuck Foam Noodle, 1 x User Manual, 1 x Quick Start Guide |
Frequently Asked Questions
Can it be used in a saltwater pool?
Yes. The skimmer is built to withstand salinity up to 3.5 percent and resists chlorine at 4ppm, so it works in saltwater, freshwater, and heavily sanitised pools alike.
How long does it run between charges?
It runs for 15 hours on a standard battery charge. With its solar panel collecting sunlight while it works, runtime can extend beyond 24 hours, and a DC charge restores around 78 percent in roughly four hours.
Will it work in my pool shape?
Yes. The smart zig-zag navigation and 360-degree movement let it clean oval, rectangular, kidney-shaped, and freeform pools without manual guidance.
How do I clean and maintain it?
Maintenance is simple. Detach the filter baskets, rinse them out with a garden hose, let them sun-dry, then reassemble. No tools or special cleaning agents are needed.
Does it get stuck on steps or the suction port?
No. Four stabiliser legs with auto-adjusting buoyancy and tilt sensors prevent step and shallow-water stranding, while the included foam guard stops the unit from trapping against a skimmer suction port.
