Turn plain wood, leather, glass and metal into personalised pieces with the WAINLUX K10 Desktop Laser Engraver, a fully enclosed engraving and marking machine built for homes, craft studios and small businesses across Cyprus. Measuring just 225mm wide, the K10 sits comfortably on a kitchen worktop or office desk while delivering 0.01mm positioning precision, sharp enough for fine lettering, portrait detail and intricate line work.
Choose between a 3W laser module for wood, bamboo, card, scratch paper, leather, glass, ceramic, silicone, rubber, acrylic, PVC, black slate and coated metal, or the 5W module which adds bare metals such as stainless steel to that list. The transparent orange enclosure filters the beam so no safety goggles are required, and the K10 cuts out automatically if the machine is tilted or the cover is lifted. Connect over WiFi or USB, load your artwork from the mobile app or from LightBurn on desktop, and start engraving with a single button press.
Fully Enclosed Class 1 Housing
The tinted enclosure surrounds the laser head on all sides, containing the beam while still letting you watch the engraving progress. No protective eyewear is needed during operation.
3W or 5W Laser Module
The 3W module handles wood, leather, glass, slate, acrylic and coated metal. The 5W upgrade covers everything the 3W does and adds bare metals including stainless steel and brass.
0.01mm Engraving Precision
Positioning accuracy of 0.01mm resolves fine serif lettering, shaded portraits and dense ornamental patterns without the edges blurring together.
Dual Safety Cut-Off
Two independent triggers halt the laser: tilting the machine beyond roughly 13 degrees, or lifting the protective cover mid-job. Both stop the beam immediately.
WiFi, USB and App Control
Send designs wirelessly over WiFi or connect by USB serial cable. The K10 works with the mobile app on iOS and Android, with desktop software on Windows and macOS, and with open-source LightBurn.
Cuts Wood Up to 3mm
Beyond surface marking, the laser cuts through thin wood and ply up to 3mm, opening the door to lamps, model kits, gift tags and layered decorative panels.
Air-Cooled and Quiet
An integrated fan cools the laser module throughout longer jobs, keeping output consistent while running at a low noise level suitable for a shared living space.
Compact 225mm Desktop Footprint
At 225 x 204 x 187mm the K10 occupies less desk space than a typical desktop printer, so it can live permanently on a work surface or be stored in a cupboard between projects.
Why Choose the WAINLUX K10 Laser Engraver in Cyprus?
Personalised goods sell well in Cyprus. Wedding favours, christening gifts, engraved olive wood boards, branded bar coasters, souvenir slate and named pet tags all command a premium, and until recently producing them meant outsourcing to a workshop or investing in an open-frame laser that needs a dedicated, ventilated room. The K10 removes that barrier. Its sealed housing and small footprint mean it can run on a table in a Nicosia flat, in the back office of a Limassol boutique, or in a Paphos studio catering to the tourist trade.
Because the beam is contained and the machine stops the moment the cover is opened, the K10 is practical in shared spaces where an open-frame diode laser would not be. Families can watch a design appear through the viewing window, and small business owners can produce short runs of personalised stock between customers rather than blocking out a full production day.
Suited to Cypriot Homes, Studios and Small Businesses
- Apartment Friendly: The enclosed design and low running noise make it workable in flats and terraced homes where an open laser bed would not be appropriate
- Local Souvenir and Gift Production: Engrave olive wood, bamboo, leather and slate for craft markets, hotel gift shops and wedding suppliers
- Hospitality Branding: Mark coasters, menu boards, bottle openers and drinkware with a bar or taverna logo in small batches, on demand
- No Goggles or Dedicated Room: The Class 1 sealed enclosure removes the need for laser eyewear and a separate workshop space
- Works With Your Existing Devices: WiFi and USB connectivity across Windows, macOS, iOS and Android, plus LightBurn support for users who already know the software
- Purifier Ready: The enclosure accepts an optional fume purifier attachment for extended sessions in enclosed rooms
Makers in Nicosia, Limassol, Larnaca and Paphos are increasingly selling customised pieces through Instagram, weekend markets and small retail units, where the ability to turn an order around in an afternoon matters more than raw production volume. The K10 fits that model precisely. Load a design from your phone, place the item under the laser, close the cover, and produce a finished piece while you carry on with something else.
Technical Specifications:
| Model | WAINLUX K10 |
| Type | Fully enclosed desktop laser engraving and marking machine |
| Laser Power Options | 3W or 5W module |
| Laser Safety Class | Class 1 (enclosed) |
| Engraving Precision | 0.01mm |
| Cutting Capability | Wood up to 3mm |
| Machine Dimensions | 225 x 204 x 187mm |
| Focusing | Manual open-type focus adjustment |
| Cooling | Air cooled with integrated fan |
| Connectivity | WiFi wireless, USB to serial wired |
| Compatible Systems | Windows, macOS, iOS, Android |
| Software | WAINLUX mobile app, desktop software, LightBurn compatible |
| Safety Features | Enclosed beam path, tilt cut-off at approximately 13 degrees, cover-open cut-off |
| Controls | One-touch start and stop |
| Materials (3W) | Wood, bamboo, card, scratch paper, leather, glass, ceramic, silicone, rubber, acrylic, PVC, black slate, coated metal |
| Materials (5W) | All 3W materials plus bare metals including stainless steel and brass |
| Optional Accessory | Fume purifier attachment (sold separately) |
| Warranty | 2 years |
Frequently Asked Questions
What is the difference between the 3W and 5W versions?
The 3W module engraves wood, bamboo, card, leather, glass, ceramic, silicone, rubber, acrylic, PVC, black slate and coated metal. The 5W module handles all of those materials and additionally marks bare metals such as stainless steel and brass. Choose 5W if metal marking is part of your work.
Do I need laser safety goggles to use it?
No. The K10 is a fully enclosed Class 1 machine, so the beam is contained within the tinted housing and protective eyewear is not required during normal operation. Keep the cover closed while the laser is running.
What happens if the cover is opened mid-job?
The laser stops immediately. A second cut-off also triggers if the machine is tilted beyond roughly 13 degrees, so the beam cannot fire if the unit is picked up or knocked while working.
Which software and devices does it work with?
You can connect over WiFi or by USB serial cable. The K10 supports the WAINLUX app on iOS and Android, desktop software on Windows and macOS, and the open-source LightBurn program for users who prefer it.
Can it cut as well as engrave?
Yes. Alongside surface engraving and marking, the laser cuts thin wood and ply up to 3mm thick, which suits gift tags, model parts, layered light boxes and decorative panels.
