Get a smooth, even finish on doors, shutters, railings and walls with this Electric Paint Spray Gun, a mains-powered HVLP sprayer built for renovation work and regular property maintenance across Cyprus. A 2.5mm brass nozzle sits at the heart of the atomising system, producing fine, consistent coverage while standing up to the abrasion that wears out plastic and alloy tips.
Output is entirely in your hands. The flow dial behind the trigger adjusts steplessly rather than clicking between fixed settings, so you can dial back for thin primers or open it up for emulsion. Rotating the air cap switches the pattern between a horizontal fan, a vertical fan and a round spot, and the whole head turns through 360 degrees for angled and overhead work without paint running back towards the motor. When the job is done, a single press releases the gun body from the housing for rinsing, and the rear cover twists off so the dust sponge can be swapped out.
2.5mm Brass Nozzle
The fitted tip is machined from brass rather than moulded plastic, holding its bore shape through repeated jobs and delivering a finer break-up of the coating as it leaves the gun.
Three Selectable Spray Patterns
Turn the air cap left for a fan pattern or right for a round spot. Match the shape to the surface: wide fans for flat panels, a tight circle for spindles, frames and narrow sections.
Stepless Flow Adjustment
The rear dial turns downward to increase delivery and upward to restrict it, moving smoothly through the full range so you can find the exact rate a coating needs instead of jumping between presets.
360-Degree Rotating Head
The spray head swivels through a complete circle, letting you approach ceilings, undersides of shelving and awkward corners at a working angle while the container stays upright.
Push-Button Body Release
Press the catch on top of the housing and the gun assembly pulls straight out of the motor unit, so the wetted parts can be taken to the tap and flushed without dismantling anything else.
Vented Housing with Replaceable Filter
Louvred intakes draw air across the motor to shed heat during longer sessions, while a sponge filter behind the twist-off rear cover traps dust and lifts out for replacement with no tools.
Why Choose This Electric Paint Spray Gun in Cyprus?
Property upkeep on the island is relentless. Strong summer sun fades and chalks exterior coatings, salt-laden air off the coast attacks metalwork, and timber shutters, pergolas and gates need refreshing far more often than they would in a cooler climate. Doing that work with a brush and roller eats weekends. A sprayer covers the same area in a fraction of the time and leaves no brush marks behind.
Because this model runs off mains power rather than a battery, there is no charge cycle to plan around and no drop in performance as a pack depletes. Plug it in and keep working. The pairing of a brass tip with stepless flow control means it handles thin wood preservatives and heavier emulsion equally well, provided the coating falls within the recommended viscosity window.
Suited to Cyprus Homes, Villas and Workshops
- Exterior Walls and Render: Cover large facade areas quickly with masonry paint before the midday heat sets in
- Metal Railings and Gates: Reach between balusters and around scrollwork where a brush leaves thin patches and drips
- Timber Treatment: Apply preservative to pergolas, decking rails and shutters, with most wood preservatives needing no thinning
- Interior Redecoration: Emulsion walls and ceilings using the rotating head to spray upward without paint tracking back into the housing
- Roof Sheeting and Outbuildings: Coat corrugated panels, storage sheds and garage doors in a single continuous pass
- Fast Turnaround Between Jobs: Detachable body and rinse-through cleaning mean the gun is ready for the next colour in minutes
Homeowners in Nicosia refreshing interior walls, landlords in Limassol and Larnaca turning around rental units between tenancies, and workshop owners in Paphos finishing furniture and metal fabrications all face the same constraint: time. This sprayer shortens the application stage considerably while giving a more uniform film than hand application, and its straightforward maintenance routine keeps it in service season after season.
Technical Specifications:
| Type | HVLP electric spray gun, mains powered |
| Power Supply | 220-240V AC, corded |
| Nozzle Diameter | 2.5mm |
| Nozzle Material | Brass |
| Spray Patterns | Horizontal fan, vertical fan, round |
| Head Rotation | 360 degrees |
| Flow Control | Stepless dial adjustment |
| Recommended Coating Viscosity | 20-40 seconds (flow cup) |
| Compatible Coatings | Solvent-based paint and primer, water-based paint and primer, emulsion, wood preservative, automotive paint, insecticide and disinfectant solutions |
| Body Release | Push-button, tool-free |
| Air Filtration | Replaceable dust sponge behind twist-off rear cover |
| Colour | Teal / black |
| Includes | 1 x Electric Paint Spray Gun, 1 x Graduated Paint Container |
| Warranty | 2 years |
Frequently Asked Questions
Do I need to thin the paint before spraying?
In most cases yes. The sprayer is designed for coatings that flow through a viscosity cup within 20 to 40 seconds. Solvent paints typically fall between 15 and 40 seconds, water-based paints between 20 and 35, and emulsion between 30 and 40. Wood preservatives and insecticide solutions are usually thin enough to spray as supplied. Test with a viscosity cup and add the manufacturer’s recommended thinner if the coating runs too slowly.
Can it spray ceilings and other upward surfaces?
Yes. The head rotates through 360 degrees so you can angle the nozzle upward while keeping the container level. Do not tip the whole unit upside down or lay it on its side with paint in the container, as coating can run back into the motor.
How do I change the spray pattern?
Turn the air cap at the front of the gun. Rotating it one way gives a fan pattern, the other way gives a round spot, and turning the head itself sets the fan to horizontal or vertical depending on the direction of your pass.
What is involved in cleaning it after use?
Clean it straight away, before the coating dries. Empty and rinse the container, fill it with clean water or the appropriate solvent, then spray for around 30 to 60 seconds to flush the valve and nozzle. Pressing the release button separates the gun body from the motor housing so the wetted components can be washed properly.
Is it corded or battery powered?
This is the corded mains version. It plugs into a standard household socket and runs continuously without needing to stop for recharging, which suits longer sessions such as full rooms or exterior walls.
